Expedition 2WD V8-4.6L SOHC VIN 6 (1999)
2. NOTE: When installing the air lines, make sure the white air line is fully inserted into the fitting for correct installation.
Connect the air line into the solenoid valve line fitting.
3. Position the air spring into place and install the retaining clip at the top of the air spring.
4. Visually inspect each air spring to ensure the correct profile has been obtained and the air spring is secured to the axle housing. There should be no
evidence of buckling or folding of the air springs.
5. Lower the vehicle.
6. Inflate the air suspension system.