Expedition 2WD V8-4.6L SOHC VIN 6 (1999)
Suspension Strut / Shock Absorber: Service and Repair
Front Shock Absorber
Removal
WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle.
This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in unexpected
inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
1. Hold the front shock absorber, and remove the upper shock absorber nut and washer assembly.
2. Raise and support the vehicle.
3. Remove the front shock absorber.
1
Remove the lower shock absorber nuts.
2
Remove the front shock absorber.
Installation