Expedition 2WD V8-4.6L SOHC VIN 6 (1999)
Remove the manual lever shaft retaining pin.
11. Remove the inner manual control lever shaft nut and slide the manual control lever shaft out of the case.
12. Remove the parking lever actuating rod.
1
Remove the manual valve detent lever.
2
Remove the parking lever actuating rod.
13. CAUTION: Use care not to damage the manual control lever shaft bore. New seal may leak.
Remove the manual control lever shaft seal.
Installation
1. Use (A) Shift Lever Seal Replacer to install the (B) manual control lever seal.
