Expedition 2WD V8-4.6L SOHC VIN W (2000)
6. Remove the screws.
7. Remove the pin-type retainer.
8. Remove the side shield.
1
Pull the side shield out far enough and disconnect the power lumbar switch.
2
Pull the wire harnesses through the seat cushion frame and remove the side shield.
9. Remove the seat control switch from the side shield.
1
Remove the screws.
2
Remove the seat control switch.
INSTALLATION
1. To install, reverse the removal procedure.
2. Reactivate the supplemental restraint system. For additional information, refer to Air Bag Systems.