Expedition 2WD V8-4.6L SOHC VIN W (2000)
Engine Temperature Sensor: Service and Repair
Removal and Installation
Warning: The electrical power to the air suspension system must be shut off prior to hoisting or jacking an air suspension vehicle. This can be
accomplished by turning off the air suspension switch located below the glove box in the lower right of the passenger foot well. Failure to do so
can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during the operations. Failed to
follow the instruction may result in personal injury.
1. Raise the vehicle on a hoist.
2. Remove the right front fender splash shield.
3. Remove the dual converter Y-pipe.
4. Remove the components in the order indicated in the following illustration and table.
5. To install, reverse the removal procedure.