ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 7062 > < Initial Inspection and Diagnostic Overview|Page 7060
Page 14
background image

-

Is any voltage present?

Yes

GO to AC2.

No

The vehicle is operating correctly. SEND the trailer to an authorized camper/trailer repair facility.

-------------------------------------------------
AC2 CHECK THE TRAILER TOW RELAY

-

Ignition OFF.

-

Disconnect: Suspect Trailer Tow Relay.

-

Measure the voltage between the trailer tow 4-pin connector, harness side and ground as follows:

-

Is any voltage present?

Yes

REPAIR circuit CAT06 (YE) (LH turn), circuit CAT09 (OG) (RH turn), or circuit CAT11 (BN) (parking lamps) for a short to voltage. TEST the system
for normal operation.

No

INSTALL a new turn trailer tow relay. TEST the system for normal operation.

-------------------------------------------------

Pinpoint Test AD: The Trailer Battery Charging Is Inoperative/Does Not Operate Correctly

Trailer Lamps

Pinpoint Tests

Pinpoint Test AD: The Trailer Battery Charging Is Inoperative/Does Not Operate Correctly

Normal Operation

Initial Inspection and Diagnostic Overview|Page 7062 > < Initial Inspection and Diagnostic Overview|Page 7060