Expedition 2WD V8-5.4L (2009)
Body / Frame Mount Bushing: Description and Operation
DESCRIPTION AND OPERATION
Frame and Body Mounting
The frame is made up of 2 steel boxed side rails and crossmembers, which are welded to the 2 side rails. The transmission crossmember is bolted to
the side rails. The side welded rails and crossmembers are not replaced separately.
The service kits available for the frame are the following:
-
RH front horn replacement kit
-
LH front horn replacement kit
-
Front bumper bracket replacement kit
-
1B crossmember replacement kit
-
Transmission crossmember replacement kit
-
Exhaust hanger bracket kit
Refer to the instructions included in the kits for installation instructions.
Frame Mounted Heat Shields
All frame-mounted heat shields, except the spare tire heat shield and the upper control arm heat shield, are tightened to 20 Nm (177 lb-in). The spare
tire heat shield is tightened to 25 Nm (18 lb-ft). The upper control arm heat shield is tightened to 15 Nm (133 lb-in).
Frame Components
