Expedition 2WD V8-5.4L (2009)
4. Connect the LH safety canopy module electrical connector.
5. Install the LH C-pillar trim panel and attach the rear door weatherstrip.
6. Install the LH C-pillar trim panel nut and cover.
7. Install the LH second row safety belt retractor D-ring and bolt.
-
Tighten to 40 Nm (30 lb-ft).
8. Attach the LH second row safety belt retractor D-ring cover.
-
Verify the safety belt retractor operates without excessive effort or binding.
9. Connect the RH safety canopy module electrical connector.