Expedition 2WD V8-5.4L (2009)
Seat Cushion: Service and Repair
Second Row Seats
Seat Cushion - Second Row, 20 Percent
Disassembly and Assembly
NOTE: For parts identification and locations, refer to Seat - Exploded View, Second Row See: Service and Repair/Second Row Seats/Seat - Exploded
View, Second Row.
1. Remove the seat backrest. For additional information, refer to Seat Backrest - Second Row, 20 Percent See: Seat Back/Service and
Repair/Removal and Replacement/Second Row Seats/Seat Backrest - Second Row, 20 Percent.
2. Remove the 2 screws and LH side shield.
3. Remove the nut and safety belt buckle.
-
To install, align the anti-rotation tab.
-
To install, tighten to 55 Nm (41 lb-ft).
4. Release the cushion cover front J-clip.
5. Remove the 2 riser-to-cushion frame bolts and cushion frame.
-
To install, tighten to 30 Nm (22 lb-ft).
6. Release the hook-and-loop strip and remaining cushion cover J-clips.
7. Remove the cushion frame from the foam pad and cushion cover.
8. NOTICE: Use care when separating the seat cushion cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from
the seat cushion foam.
Release the hook-and-loop strips and invert the cushion cover to the row of hog rings.
9. Remove all hog rings and cushion cover.
10. To assemble, reverse the disassembly procedure.
