Expedition 2WD V8-5.4L (2009)
Seat Heater Switch: Service and Repair
Heated Seat Switch - Second Row
Heated Seat Switch - Second Row
Removal and Installation
1. Release the 4 retainer clips and remove the rear cup holder.
-
Remove any remaining retainers from the floor console and reinstall to the cup holder before installation.
2. Remove the front floor console rear panel.
-
Remove the 2 screws.
-
Release the 6 retainer clips and separate the rear panel.
-
Disconnect all the electrical connectors and remove the rear panel.
-
Remove any remaining retainers from the floor console and reinstall to the rear cover before installation.
3. Release and remove the heated seat switch(es).
4. To install, reverse the removal procedure.