Expedition 2WD V8-5.4L (2009)
Seat Track: Service and Repair
Seat Track - Manual
Seat Track - Manual
Removal and Installation
NOTE: For component identification and locations, refer to Seat - Exploded View, Front See: Service and Repair/Front Seats/Seat - Exploded View,
Front.
1. Remove the seat. For additional information, refer to Seat - Front See: Service and Repair/Front Seats/Seat - Front or.
2. Remove the inboard and outboard seat track rails.
-
Remove the 6 seat track rail-to-seat track nuts from the inboard and outboard seat track rails.
-
To install, tighten to 30 Nm (22 lb-ft).
-
Remove the inboard and outboard seat track rails.
-
Release and separate the seat track adjust handle from the seat track rails.
-
Disconnect the spring.
-
Slightly bend the tab and detach the seat adjust handle from the inboard seat track rail.
-
Note the spring position for correct installation.
3. To install, reverse the removal procedure.
