Expedition 2WD V8-5.4L (2009)
4. Loosen the brake tube fittings and disconnect the brake tubes.
-
Plug the master cylinder ports.
-
To install, tighten the fittings to 20 Nm (177 lb-in).
5. NOTICE: When the master cylinder is removed, the piston will be exposed. Do not damage the piston or piston surface or a fluid leak
may occur.
Remove the 2 brake master cylinder nuts and the brake master cylinder.
-
To install, tighten to 25 Nm (18 lb-ft).
6. To install, reverse the removal procedure.
-
Bleed the brake system.
