Expedition 2WD V8-5.4L (2009)
8. Disconnect the upper radiator hose from the radiator.
9. Disconnect the upper radiator hose position retainer from the cooling fan shroud.
10. Disconnect the electrical connector and the wiring harness position retainer.
11. If equipped, disconnect the wiring harness position retainer from the vacuum reservoir.
12. If equipped, disconnect the vacuum connectors and the electrical connector on the LH side of the cooling fan shroud and remove the vacuum
canister.
13. Disconnect the wiring harness retainer from the RH side of the radiator.
14. NOTE: LH shown, RH similar.
Remove the 2 cooling fan shroud bolts and the wiring harness retainers.
-
To install, tighten to 7 Nm (62 lb-in).
