Expedition 2WD V8-5.4L (2009)
5. Release the cooling fan shroud position tab and rotate the shroud upwards until the lower tab locks into position.
6. NOTICE: Do not sideload the cooling fan clutch coil or the cooling fan clutch may be damaged.
Using the Fan Clutch Nut Wrench and Fan Pulley Holding Wrench, remove the cooling fan and clutch assembly.
-
To install, tighten to 48 Nm (35 lb-ft).
-
If servicing the cooling fan or cooling fan clutch, refer to Cooling Fan and Cooling Fan Clutch See: Service and Repair.
7. To install, reverse the removal procedure.
-
Install 2 new cooling fan shroud pushpins.
