Expedition 2WD V8-5.4L (2009)
22. NOTICE: If the components are to be reinstalled, they must be installed into their original locations. Failure to follow this instruction
may result in engine damage.
NOTE: Do not allow the valve keepers to fall off of the valve or the valve may drop into the cylinder. If a valve drops into the cylinder, the
cylinder head must be removed. For additional information, refer to Cylinder Head See: Cylinder Head Assembly/Service and Repair/Removal
and Replacement/Cylinder Head - Removal.
NOTE: It may be necessary to push the valve down while compressing the spring.
Using the Valve Spring Compressor, install all of the camshaft roller followers.
-
Lubricate the camshaft roller followers with clean engine oil prior to installation.
23. Install the engine front cover. For additional information, refer to Engine Front Cover See: Timing Cover/Service and Repair.
