Expedition 2WD V8-5.4L (2009)
Install the coolant pump and 4 bolts.
-
Tighten to 25 Nm (18 lb-ft).
2. Install the coolant pump pulley and 4 bolts.
3. Install the accessory drive belt.
4. Tighten the 4 bolts for the coolant pump pulley.
-
Tighten to 25 Nm (18 lb-ft).
5. Install the cooling fan. For additional information, refer to Cooling Fan See: Cooling System/Radiator Cooling Fan/Fan Blade/Service and Repair.
6. Fill the engine cooling system. For addition information, refer to Cooling System Draining, Filling and Bleeding See: Cooling System/Service and
Repair/Cooling System Draining, Filling And Bleeding.
