Expedition 2WD V8-5.4L (2009)
Expansion Block/Orifice Tube: Service and Repair
Thermostatic Expansion Valve - Climate Control
Thermostatic Expansion Valve
Removal and Installation
1. Recover the refrigerant.
2. Remove the Thermostatic Expansion Valve (TXV) manifold and tube bracket bolt.
-
To install, tighten to 8 Nm (71 lb-in).
3. Detach the wire harness pin-type retainer and position the harness aside.
4. Remove the auxiliary evaporator inlet line fitting nut and disconnect the fitting.