Expedition 2WD V8-5.4L (2009)
Remove the FP and FP O-ring seal.
-
If necessary, insert a screwdriver into the empty FP rod hole and slightly pull the screwdriver inboard until the base of the FP clears the FP
mounting flange.
-
Discard the FP O-ring seal.
127L (33.5 gal) fuel tank
7. NOTICE: Carefully remove the Fuel Pump (FP) assembly to avoid damaging the fuel level sensor.
NOTE: Note the location of the FP alignment tabs.
Remove the FP module assembly.
-
Remove and discard the O-ring seal.
All fuel tanks
8. To install, reverse the removal procedure.
