Expedition 2WD V8-5.4L (2009)
13. Install the muffler heat shield and the 3 muffler heat shield bolts.
14. Install the RH CMS.
15. Install the muffler.
16. Working through the RH fender well opening, Install the RH catalytic converter heat shield front bolt.
17. Install the front auxiliary line bracket and the front auxiliary line bracket nut.
-
Tighten to 5 Nm (44 lb-in).
18. Install the spare tire carrier splash shield and the 3 spare tire carrier splash shield bolts.
19. Install the RH front fender splash shield.
20. Install the RH front wheel.
Expedition EL or Navigator L only
21. Install the RH rear wheel and tire assembly.
All vehicles
22. Install the spare tire.
23. Lubricate the refrigerant system with the correct amount of clean PAG oil.
24. Evacuate, leak test and charge the refrigerant system.
