Expedition 2WD V8-5.4L (2009)
NOTE: All message center functions are carried out using the single stem reset button in the Instrument Cluster (IC).
NOTE: The oil life start value is used to increase or decrease the starting point of the oil life. The value can be changed back to the maximum of
approximately 12,000 km (7,500 miles) if the value was previously changed or lowered by 10% increments down to 10%.
1. Press and release the reset button to scroll through the information displays until the message center displays HOLD RESET FOR SETUP MENU.
2. Press and hold the reset button for approximately 2 seconds until the message center displays HOLD RESET FOR SYSTEM CHECK.
3. Press and release the reset button until the message center displays OIL LIFE = XXX% HOLD RESET = NEW.
4. Press and hold the RESET button for 2 seconds and release when the message center displays OIL LIFE SET TO 100%.
5. Press the RESET button to lower 10% from the default 100% until the message center displays OIL LIFE SET TO XX%.
6. NOTE: The oil life start value can be lowered from 100% to 10% in 10% increments then the value starts again at 100%.
Repeat steps 2-5 for each desired 10% reduction.
7. Press and release the reset button to exit the procedure.
