Expedition 2WD V8-5.4L (2009)
Air Filter Element: Service and Repair
Air Cleaner Element
Air Cleaner Element
Removal and Installation
1. Disconnect the Air Cleaner (ACL) outlet pipe from the ACL cover.
-
To install, tighten the clamps to 4 Nm (35 lb-in).
2. Disconnect the Mass Air Flow (MAF) sensor electrical connector.
3. Release the retaining clips and position the ACL cover aside.
4. Remove the ACL element.
5. NOTE: The ACL element must be fully seated into the ACL housing. Failure to do so will result in unusual engine noise.
To install, reverse the removal procedure.
