Expedition 2WD V8-5.4L (2009)
Wheel Fastener: Service and Repair
Front Suspension - Rear Wheel Drive (RWD)
Wheel Studs
Removal
NOTICE: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure may result
in major service expense. New parts must be installed with the same part numbers or equivalent parts, if replacement is necessary. Do not use a
replacement part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct
retention of these parts.
1. Remove the wheel and tire.
2. NOTICE: Do not allow the brake caliper and anchor plate assembly to hang from the brake hose or damage to the hose may result.
Remove the 2 bolts and position the brake caliper and anchor plate assembly aside.
-
Support the brake caliper and anchor plate assembly using mechanic's wire.
3. Remove the brake disc.
4. Using the C-Frame and Screw Assembly, remove the wheel stud.
