ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3027 > < Initial Inspection and Diagnostic Overview|Page 3025
Page 55
background image

-

Is the vehicle equipped with a DCSM?

Yes

GO to U19.

No

GO to U20.

-------------------------------------------------
U19 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE DCSM DISABLED

-

Disconnect: BJB Fuse 67 (40A).

-

Enter the following diagnostic mode on the scan tool: Network Test.

-

Repeat the network test.

-

Do all other modules pass the network test?

Yes

INSTALL the removed fuse. Go To Pinpoint Test Q.  See: Pinpoint Test Q: The Dual Climate Controlled Seat Module (DCSM) Does Not Respond To
The Scan Tool

No

INSTALL the removed fuse. GO to U20.

-------------------------------------------------
U20 VERIFY VEHICLE EQUIPMENT - PRB MODULE

-

Inspect the vehicle for a Power Running Board (PRB) module.

-

Is the vehicle equipped with a PRB module?

Yes

GO to U21.

No

GO to U22.

-------------------------------------------------
U21 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE PRB MODULE DISABLED

-

Disconnect: BJB Fuse 11 (40A).

-

Enter the following diagnostic mode on the scan tool: Network Test.

-

Repeat the network test.

-

Do all other modules pass the network test?

Yes

INSTALL the removed fuse. Go To Pinpoint Test R.  See: Pinpoint Test R: The Power Running Board (PRB) Module Does Not Respond To The Scan
Tool

No

INSTALL the removed fuse. GO to U22.

-------------------------------------------------
U22 VERIFY VEHICLE EQUIPMENT - PAM

-

Inspect the vehicle for a Parking Aid Module (PAM).

-

Is the vehicle equipped with a PAM?

Yes

Initial Inspection and Diagnostic Overview|Page 3027 > < Initial Inspection and Diagnostic Overview|Page 3025