ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3034 > < Initial Inspection and Diagnostic Overview|Page 3032
Page 62
background image

Yes

GO to V14.

No

GO to V15.

-------------------------------------------------
V14 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE HVAC MODULE
DISCONNECTED

-

Disconnect: HVAC Module C228a (EATC) or C2357a (EMTC).

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to V17.

No

CONNECT all modules. CONNECT the negative battery cable. GO to V62.

-------------------------------------------------
V15 VERIFY VEHICLE EQUIPMENT - APIM

-

Inspect the vehicle for an APIM.

-

Is the vehicle equipped with an APIM?

Yes

GO to V16.

No

GO to V17.

-------------------------------------------------
V16 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE APIM DISCONNECTED

-

Disconnect: APIM C3342.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to V17.

Initial Inspection and Diagnostic Overview|Page 3034 > < Initial Inspection and Diagnostic Overview|Page 3032