ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3036 > < Initial Inspection and Diagnostic Overview|Page 3034
Page 64
background image

-

Is the resistance less than 5 ohms?

Yes

GO to V21.

No

CONNECT all modules. CONNECT the negative battery cable. GO to V65.

-------------------------------------------------
V21 VERIFY VEHICLE EQUIPMENT - DSM

-

Inspect the vehicle for a Driver Seat Module (DSM).

-

Is the vehicle equipped with a DSM?

Yes

GO to V22.

No

GO to V23.

-------------------------------------------------
V22 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE DSM DISCONNECTED

-

Disconnect: Driver Seat Module C341d.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to V23.

No

CONNECT all modules. CONNECT the negative battery cable. GO to V66.

-------------------------------------------------
V23 VERIFY VEHICLE EQUIPMENT - DCSM

-

Inspect the vehicle for a Dual Climate Controlled Seat Module (DCSM).

-

Is the vehicle equipped with a DCSM?

Yes

GO to V24.

No

GO to V25.

Initial Inspection and Diagnostic Overview|Page 3036 > < Initial Inspection and Diagnostic Overview|Page 3034