Expedition 2WD V8-5.4L (2009)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder - Functional
Ignition Lock Cylinder - Functional
Removal and Installation
1. Remove the Passive Anti-Theft System (PATS) transceiver.
2. NOTE: The ignition lock cylinder must be in the RUN position.
Using a suitable tool, press the release pin and remove the ignition lock cylinder.
3. If a new lock cylinder with keys is replaced, the new PATS keys must be programmed.
4. To install, reverse the removal procedure.
-
Verify the ignition lock cylinder operation.
