Expedition 2WD V8-5.4L (2009)
Installation
1. NOTICE: Do not damage the lower ball joint boot when installing the C-Frame and Screw Installer/Remover and the Ball Joint
Installer/Remover or premature failure of the ball joint may occur.
NOTE: Make sure the ball joint snap ring is fully seated.
Using the C-Frame and Screw Installer/Remover and the Ball Joint Installer/Remover, install the lower ball joint.
-
Install the ball joint snap ring.
2. Install the wheel knuckle. For additional information, refer to Wheel Knuckle See: Front Steering Knuckle/Service and Repair.
