Expedition 2WD V8-5.4L (2009)
10. Remove the RH lower IC screw.
11. Remove the LH lower IC screw and position the IC aside.
12. NOTICE: To prevent cable damage, do not apply force to the selector lever cable assembly between the steering column selector lever
arm and the steering column bracket.
Disconnect the selector lever cable.
13. Remove the locking pin and the park lock cable.
1. Remove and discard the locking pin.
2. Disconnect the park lock cable.
14. Disconnect the Tow/Haul switch electrical connector and the harness from the retaining clips.
