Expedition 2WD V8-5.4L (2009)
Installation
1. Install the BSIA onto the selector lever mechanism.
1. Pull the BSIA override button.
2. Align the selector lever tab into the BSIA.
3. Position and secure the BSIA with the clip.
4. Install the screw.
2. Install the selector lever mechanism into the vehicle, install the upper bolts and connect the BSIA electrical connector.
-
Tighten to 6 Nm (53 lb-in).
3. Install the selector lever mechanism lower bolt.
-
Tighten to 6 Nm (53 lb-in).
4. Install the selector lever.
-
Tighten to 18 Nm (159 lb-in).
5. Connect the Tow/Haul switch electrical connector and the harness into the retaining clips.
