Expedition 2WD V8-5.4L (2009)
2. Install a new LH selector lever knob screw.
-
Tighten to 2 Nm (18 lb-in).
3. Install a new RH selector lever knob screw.
-
Tighten to 2 Nm (18 lb-in).
4. NOTE: Wood-trimmed vehicles have a rubber damper not found on other trim levels.
Install a new LH selector lever knob cover.
5. NOTE: Wood-trimmed vehicles have a rubber damper not found on other trim levels.
Install a new RH selector lever knob cover.
6. Install the console upper trim and the screw.
