Expedition 2WD V8-5.4L (2009)
Removal
Funkmaster Flex vehicles
1. NOTE: The serial numbered name plate is securely fastened to the console with double-sided adhesive tape. Excessive lifting or prying will bend
or damage the serial numbered name plate.
Using an appropriate tool, slightly lift the lower RH corner of the serial numbered name plate upward to gain access to the double-sided adhesive
tape, located on the bottom of the name plate.
2. NOTE: The serial numbered name plate is securely fastened to the console with double-sided adhesive tape. Excessive lifting or prying will bend
or damage the serial numbered name plate.
Starting at the RH corner of the serial numbered name plate, position a piano wire, or an equivalent tool, between the name plate and the floor
console finish panel and cut the double-sided adhesive tape on the bottom of name plate.
3. NOTE: The serial numbered name plate is securely fastened to the console with double-sided adhesive tape. Excessive lifting or prying will bend
