Expedition 2WD V8-5.4L (2009)
2. Remove and discard the auxiliary transmission fluid cooler inlet hose clamps.
3. Disconnect the auxiliary transmission fluid cooler inlet hose from the coolers.
4. With the vehicle in NEUTRAL, position it on a hoist.
5. Position the flexible air deflector aside, then remove and discard the transmission fluid cooler tube secondary latches.
6. Using the Transmission Cooler Line Disconnect Tool, disconnect the transmission fluid cooler hoses from the transmission fluid cooler tubes.
7. Remove and discard the transmission fluid cooler hose clamps.
8. Disconnect the transmission fluid cooler hoses from the coolers.
Installation
1. Connect the transmission fluid cooler hoses to the coolers.
2. Install new transmission fluid cooler hose clamps.
3. Connect the transmission fluid cooler hoses to the transmission fluid cooler tubes.
4. Install new transmission fluid cooler tube secondary latches, then position the flexible air deflector back into place.
5. Connect the auxiliary transmission fluid cooler inlet hose to the coolers.
6. Install new auxiliary transmission fluid cooler inlet hose clamps.
7. Install the upper radiator cover.
1. Install the fasteners.
8. Fill the transmission with fluid and verify correct operation.
