Expedition 2WD V8-5.4L (2009)
3. Remove the transmission cooler tube secondary latches.
4. Using the Transmission Cooler Line Disconnect Tool, disconnect the transmission fluid cooler tubes from the transmission fluid cooler hoses.
5. Remove the transmission fluid cooler tube bracket nut from the front of the engine.
6. Remove the transmission fluid cooler tube bracket bolt from the RH side of the transmission.
7. NOTE: The transmission fluid cooler tube O-rings may remain in the transmission case. Carefully remove them from the case if retained.
Remove the transmission fluid cooler tube bracket bolt and disconnect the transmission fluid cooler tubes from the transmission.
8. Remove and discard the 4 sway bar bracket nuts and lower the front sway bar.
