Expedition 2WD V8-5.4L (2009)
Wiper Arm: Service and Repair
Wiper Mounting Arm and Pivot Shaft - Rear
Wiper Mounting Arm and Pivot Shaft - Rear
Removal and Installation
1. Remove the rear wiper pivot arm. For additional information, refer to Wiper Pivot Arm - Rear See: Wiper Pivot Arm - Rear.
2. Remove the dust boot cover.
3. Remove the nut and the rear window glass handle.
-
To install, tighten to 18 Nm (159 lb-in).
4. Open the liftgate glass.
5. Remove the nuts and the rear window wiper striker and wiper pivot shaft assembly.
-
To install, tighten to 6 Nm (53 lb-in).
6. To install reverse the removal procedure.
