Expedition 2WD V8-5.4L (2009)
Wiper Motor: Service and Repair
Wiper Motor - Rear Window
Wiper Motor - Rear Window
Removal
1. Remove the rear wiper pivot arm. For additional information, refer to Wiper Pivot Arm - Rear See: Wiper Arm/Service and Repair/Wiper Pivot
Arm - Rear.
2. Remove the dust boot cover.
3. Remove the nut and the rear window glass handle.
4. Open the liftgate glass.
5. Remove the nuts and the rear window striker and wiper pivot shaft assembly.
6. Remove the liftgate trim panel.
7. Close the liftgate.
8. If installing a new rear wiper motor, remove the liftgate window glass latch.
1. Disconnect the electrical connector.
2. Remove the bolts.
