Expedition 2WD V8-5.4L SOHC VIN L (1997)
12. Fit the female fitting to the male fitting and push with a twisting motion until the garter spring snaps over the flared end of the female fitting.
NOTE: If a plastic indicator ring is used, it will snap out of the cage opening when the coupling is connected to indicate engagement.
13. If an indicator ring is not used, check the coupling engagement by making sure the garter spring is over the flared end of the fitting.
14. Connect the heater core hoses.
15. Install the instrument panel. Refer to: "Body and Frame : Interior Trim : Dash Board : Service and Repair" See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
16. Fill the radiator. Refer to: "Engine, Cooling and Exhaust : Cooling System : Service and Repair" See: Engine, Cooling and
Exhaust/Cooling System/Service and Repair
17. Charge the A/C system. Refer to: "Heating and Air Conditioning : Service and Repair" See: Service and Repair