Expedition 2WD V8-5.4L SOHC VIN L (1997)
Fluid Line/Hose: Testing and Inspection
1. When fluid leakage is found at the transmission fluid cooler, the transmission fluid cooler must be replaced.
2. When transmission fluid cooler steel lines must be replaced, each replacement line must be fabricated from the same size inside diameter and
length steel line as the original line.
3. Using the old line as a guide, bend the new line as required. Add the necessary fittings, and install the line.
4. After the fittings have been tightened, check and add fluid as necessary. Check for fluid leaks.