Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
![background image](/ford/expedition_4wd/v8-4.6l_sohc_vin_6/Page-1332003.png)
9. Install the brake booster tube bracket.
1
Install the brake booster tube.
2
Install the two hose clamps.
3
Install the brake booster tube bracket nut.
10. Connect the heater water inlet tube.
1
Connect the heater inlet tube hose to inlet tube.
2
Slide the clamp into position.
11. Connect the four LH fuel injector electrical connectors.
12. Connect the four RH fuel injector electrical connectors.
13. Connect the two fuel lines