Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
Vehicle Speed Sensor: Service and Repair
REMOVAL
1. Disconnect the battery.
2. Raise and support the vehicle.
WARNING: The electrical power to the air suspension system must be shut OFF prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning OFF the air suspension switch located in the RH kick panel area. Failure to do so may result
in unexpected inflation or deflation of the air springs which may result in shifting of the vehicle during 1 these operations.
3. Remove the Vehicle Speed Sensor (VSS).
(1) Disconnect the electrical connector.
(2) Remove the bolt.
(3) Remove the VSS.
4. Remove the Vehicle Speed Sensor (VSS) drive gear.
INSTALLATION
1. Install the Vehicle Speed Sensor (VSS) drive gear.