Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
5. Install the tire and wheel assembly.
(1) Position the tire and wheel assembly.
(2) Install the lug nuts and lower the vehicle.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
(3) Tighten in sequence the lug nuts.
(4) Install the wheel cover.
Disassembly
1. Remove the halfshaft and joint.
2. Slide the two inboard clamp protectors off the boot clamps.
3. Remove the two inboard boot clamps.
CAUTION: Be careful not to damage the front wheel driveshaft joint boot.