Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
13. Remove the outboard front wheel driveshaft joint boot.
14. Inspect for contaminated grease.
15. If grease is contaminated, clean and inspect the joint for wear. Replace the outboard CV joint and interconnecting shaft assembly if worn or
damaged.
Assembly
1. Pack the outboard CV joint with grease.
(1) Use High Temp Constant Velocity Joint Grease E43Z-19590-A or equivalent meeting Ford specification ESP-MlC207-A provided in the boot
kit.
(2) Spread any remaining grease from service kit evenly inside the outboard boot.
2. Position the outboard front wheel driveshaft joint boot and outboard boot clamps.
(1) Clean the front wheel driveshaft joint boot mounting surface.
(2) Position the outboard front wheel driveshaft joint boot in the outboard CV joint grooves and position boot clamps.