Expedition 4WD V8-4.6L SOHC VIN W (1999)
5. Install the special tool over the disc and differential clutch pack.
6. Install the nut of the gauge over the top and base stud.
7. NOTE: These shims are available as part of Clutch Pack Replacement Kit F75Z-4947-AA.
Use the Feeler Gauge and select the thickest blade that will enter between the tool and the differential clutch pack. Subtract 0.010 inch from the
reading to obtain the thickness of the new clutch shim. A maximum of two shims may be used. Select the correct shim(s) size and remove the
Traction-LOK Clutch Gauge.