Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
9. Remove the seat cushion TED.
1
Cut the zip-tie, separate and remove the duct.
2
Disconnect the seat cushion TED electrical connector.
3
Remove the seat cushion TED.
Installation
1. Install the seat cushion TED.
1
Install the seat cushion TED.
2
Connect the seat cushion TED electrical connector.
3
Install the duct and zip-tie the duct to the TED.
2. Install the TED to the mounting bezel, and install the screw.
3. Install the seat cushion foam pad.
4. Install the seat cushion trim cover.
