Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
20. Lubricate the engine front cover and the crankshaft seal inner lip with clean engine oil.
21. Using the special tools, install the crankshaft seal into the engine front cover.
22. NOTE: If not secured within 4 minutes, the sealant must be removed and the sealing area cleaned. To clean the sealing area, use silicone gasket
remover and metal surface prep. Follow the directions on the packaging. Failure to follow this procedure can cause future oil leakage.
Apply silicone gasket and sealant to the Woodruff key slot on the crankshaft pulley.
23. Use the special tool to install the crankshaft pulley.
