Expedition 4WD V8-5.4L VIN 5 (2006)
3. Remove the front fender-to-radiator support bolt.
-
To install, tighten to 12 Nm (9 lb-ft).
4. Remove the 2 front fender lower bolts.
-
To install, tighten to 12 Nm (9 lb-ft).
5. Remove the foam insulator.
-
Remove the pin-type retainer.
6. Remove the 2 front fender inner bolts.
-
To install, tighten to 12 Nm (9 lb-ft).
