Expedition 4WD V8-5.4L VIN 5 (2006)
4.
Apply the Mylar tape to the backside edge of the trim component. It may be necessary to trim the tape after its been applied for a clean fit.
5.
After applying the Mylar tape, follow installation procedure for each part as listed in the appropriate Workshop Manual, Section 501.
Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
OPERATION
DESCRIPTION
TIME
070209A
2003-2006 Expedition:
1.3 Hrs.
Install Mylar Tape To The
Backside Edge Of The
License Plate Applique,
Include Time To Detrim
(Do Not Use With P42D)
070209B
2003-2006 Navigator:
1.1 Hrs.
Install Mylar Tape To The
Backside Edge Of The
License Plate Bucket,
Include Time To Detrim
(Do Not Use With P42D)
070209C
2003-2006 Expedition:
2.4 Hrs.
Additional Time To Paint
Liftgate. To Be Used With
Operation A In This TSB
(Includes Time For P101
Basic Paint) (Do Not Use
With P42)
070209C
2003-2006 Navigator:
2.2 Hrs.
Additional Time To Paint
Liftgate. To Be Used With
Operation B In This TSB
(Includes Time For P101
Basic Paint) (Do Not Use
With P42)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
78404C42
D7
Disclaimer
