Expedition 4WD V8-5.4L VIN 5 (2006)
All vehicles
3. Disconnect the brake fluid level switch.
4. Loosen the brake pipe fittings and disconnect the brake pipes.
^
Plug the master cylinder ports.
^
To install, tighten to 18 Nm (13 ft. lbs.).
5. Remove the 2 brake master cylinder nuts and the brake master cylinder.
^
To install, tighten to 22 Nm (16 ft. lbs.).
6. To install, reverse the removal procedure.
^
Bleed the brake system.
