Ford Workshop Service and Repair Manuals > Expedition 4WD V8-5.4L VIN 5 (2006) > Engine, Cooling and Exhaust | Engine | Timing Components | Variable Valve Timing | Variable Valve Timing Solenoid | Component Information

Tune-up and Engine Performance Checks > < Variable Camshaft Timing (VCT) Valve 1|Page 3468

Page 1

Variable Valve Timing Solenoid: Service and Repair

VARIABLE CAMSHAFT TIMING OIL CONTROL SOLENOID

LH Shown, RH Similar.

Removal and Installation

1. Disconnect the battery ground cable.
2. Disconnect the variable camshaft timing (VCT) oil control solenoid electrical connector.
3. Remove the VCT oil control solenoid grommet.
4. Remove the bolt and the VCT oil control solenoid. Discard the O-ring seal.

To install, tighten to 5 Nm (44 lb-in).

Install a new O-ring seal. Lubricate the new O-ring seal with clean engine oil prior to installation.

5. To install, reverse the removal procedure.

Engine, Cooling and Exhaust
Engine
Timing Components
Variable Valve Timing
Variable Valve Timing Solenoid
Component Information
Service and Repair

Tune-up and Engine Performance Checks > < Variable Camshaft Timing (VCT) Valve 1|Page 3468

Ford Workshop Service and Repair Manuals

Expedition 4WD V8-5.4L VIN 5 (2006)

Engine, Cooling and Exhaust Engine Timing Components Variable Valve Timing Variable Valve Timing Solenoid Component Information Service and Repair

Engine, Cooling and Exhaust Engine Timing Components Variable Valve Timing Variable Valve Timing Solenoid Component Information Service and Repair

Engine, Cooling and Exhaust
Engine
Timing Components
Variable Valve Timing
Variable Valve Timing Solenoid
Component Information
Service and Repair

Engine, Cooling and Exhaust
Engine
Timing Components
Variable Valve Timing
Variable Valve Timing Solenoid
Component Information
Service and Repair