Expedition 4WD V8-5.4L VIN 5 (2006)
Condenser HVAC: Service and Repair
CONDENSER CORE
Removal and Installation
NOTE: Installation of a new receiver/drier is not required when repairing the air conditioning system except when there is physical evidence of
contamination from a failed A/C compressor or damage to the receiver/drier.
1. Recover the refrigerant.
2. Remove the upper radiator sight shield.
3. Remove the 2 condenser fitting nuts and disconnect the condenser fittings.
-
Discard the O-ring seals.
-
To install, tighten to 8 Nm (71 lb-in).
4. Remove the 2 radiator bracket bolts.
-
To install, tighten to 12 Nm (9 lb-ft).
5. Remove the 2 radiator brackets.
6. Remove the 2 condenser bracket bolts.
-
To install, tighten to 9 Nm (80 lb-in).
7. Remove the 2 condenser brackets.