Expedition 4WD V8-5.4L VIN 5 (2006)
Expansion Valve: Service and Repair
Auxiliary Climate Control
THERMOSTATIC EXPANSION VALVE
Removal and Installation
1. Recover the refrigerant.
2. Remove the RH quarter trim panel.
3. Disconnect the fittings and remove the thermostatic expansion valve.
-
Discard the O-ring seals.
4. To install, reverse the removal procedure.
-
Install new O-ring seals.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
5. Evacuate, leak test and charge the refrigerant system.